延长锤式破碎机锤头寿命的方法

1 one 选择好的锤头材质。 Choose a good hammer. 材质是解决锤头耐磨性，使用寿命的最核心的因素。所以在选择材质时，要选择质量好耐磨性高以及柔韧度强的材质，这样有助于提高锤头的使用寿命。 Material is the most essential factor in the durability of the hammer. So when choosing material, choose quality to wear good wearability and strong and strong material, this helps to improve the life of the hammerhead. 2 2 固定好锤头。 Fix the hammer head. 在锤头与物料冲击过程中，如果锤头固定不好，可能引起锤头飞离转子，造成锤头损坏。所以在安装的时候就要固定好锤头，从而延长锤头寿命。 In the process of hammer head and material shock, if the hammerhead is not fixed, it may cause the hammerhead to fly off the rotor, causing the hammer head to be damaged. Therefore, the head of the hammer should be fixed at the time of installation. 3 3 定时清理破碎腔内的积料。 Regularly clean up the material in the broken cavity. 如果破碎腔内的积料过多，会对锤头造成严重的磨损，因此会降低锤头使用寿命。 If there is too much accumulation in the broken cavity, it causes severe wear and tear on the hammer head, so it will reduce the life of the hammerhead. 4 4 经常调整锤式破碎机内部间隙。 The internal clearance of hammer crusher is frequently adjusted. 在使用的过程中，必须经常调整各部分间隙，使其处于适当范围之内。这样就不会存在积料，锤头磨损就会减少，其寿命也会增加。 In the process of use, it is necessary to adjust the intervals of each section frequently to make it within the proper range. There is no such thing as a product, and the wear of the hammer decreases and the life expectancy increases. 6 6 合理制定锤式破碎机技术参数。 The technical parameters of hammer crusher are reasonable. 锤式破碎机技术参数会影响锤头的寿命，主要是转子的功率和转速。它们不仅影响到设备生产能力，也影响到锤头冲击硬化的程度。锤头冲击硬化程度保持良好的话，其使用寿命就会延长。 The technical parameters of hammer crusher can affect the life of the hammerhead, mainly the power and speed of the rotor. They affect not only the production capacity of the equipment, but also the degree of impact of the hammer. The impact of the hammer on the impact of hardening will be prolonged.